Codan 2315 Chemical Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 2315 -

Black, wrapped suction and pressure hose with double steel helix and charge eliminator wire. Note! The wire must be connected to the fittings at both ends to ensure complete electrical discharge. For use in industrial applications, e.g. as flexible connection between pipelines and tanks/tankers. Suitable for acids and other chemicals.
Vacuum: 90%. For maximum safety, please consult the chemical resistance list. Normally installed using DIN clamps. Please contact Codan for further information.

Type nr. 2315

Application: Chemicals, EPDM

Standard Length: 40 metres

Working Temperature: -30°C to 150°C

Inside: EPDM

Colour: Black

Reinforcement: Polyester w/ double steel helix and anti-static wire.

Outside: EPDM

Colour: Black

Standards:

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
19,0 30,6 16 50 95 710 2315019000
25,0 37,8 16 50 125 1.060 2315025000
32,0 46,4 16 50 160 1.300 2315032000
35,0 49,0 16 50 175 1.340 2315035000
38,0 52,4 16 50 190 1.460 2315038000
51,0 65,4 16 50 250 1.950 2315051000
63,0 79,0 16 50 350 2.930 2315063000
76,0 93,2 16 50 450 3.480 2315076000
102,0 122,4 16 50 610 5.770 2315102000

Email PDF

Please confirm that you are not a robot

Type: 2315      OE: Chemicals, EPDM

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
21/06/2025