Codan 8033 Food Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 8033 - FDA

Blue, wrapped, flexible pressure hose with special compound outer coating which ensures that the hose is exceptionally hard-wearing and weather resistant. Mainly for use as a hot water hose for cleaning purposes in dairies, slaughterhouses and elsewhere in the food industry where hot water is used for flushing/cleaning.
Can be ordered with either black or white inner liner.
Normally installed using stainless or brass fittings and hose clamps.
Please contact Codan for further information.

Type nr. 8033

Application: Cleaning

Standard Length: 40 metres

Working Temperature: -30°C to 100°C

Inside: EPDM

Colour: White

Reinforcement: Polyester

Outside: EPDM

Colour: Blue

Standards: FDA

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
13,0 24,0 10 40 0 490 8033013000
16,0 27,0 10 40 0 610 8033016000
19,0 31,0 10 40 0 730 8033019000
25,0 39,0 10 40 0 1.020 8033025000
30,0 44,0 10 40 0 1.200 8033030000
32,0 46,0 10 40 0 1.260 8033032000
38,0 53,0 10 40 0 1.580 8033038000
51,0 70,0 10 40 0 2.620 8033051000

Email PDF

Please confirm that you are not a robot

Type: 8033      OE: Cleaning

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
15/11/2025