Codan 1905 Bunker Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 1905 - -

Black, wrapped bunker hose with two charge eliminator wires to ensure complete discharge of static electricity.
For use in the oil industry, e.g. as unloading pipe from ship to quay, or for transporting mineral oil, fuel, etc. on ships.
Fits DIN clamps.
Max. 50% aromatics.
Please contact Codan for further information.

Type nr. 1905

Application: Loading and Unloading

Standard Length: 40 metres

Working Temperature: -30°C to 70°C

Inside: NBR

Colour: Black

Reinforcement: Polyester

Outside: CR

Colour: Black

Standards: -

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
51,0 62,0 16 48 0 1.740 1905051000
76,0 90,4 16 48 0 2.250 1905076000
102,0 116,8 16 48 0 3.040 1905102000
127,0 142,2 16 48 0 3.830 1905127000
152,0 169,6 16 48 0 5.360 1905152000
203,0 224,2 16 48 0 8.450 1905203000
254,0 275,6 16 48 0 10.730 1905254000

Email PDF

Please confirm that you are not a robot

Type: 1905      OE: Loading and Unloading

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
13/03/2026