Codan 1915 Oil Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 1915 - EN12115:2021 EN1761:1999

Black, wrapped pressure hose with integrated anti-static wire. Hard-wearing, weather-resistant outer layer of rubber. Inner rubber layer is resistant to max. 50% aromatics.
For use as pressure oil hose and tanker hose in industrial applications.
Assembled using DIN clamps or heavy-duty hose clamps tightened with Allen key.
Please contact Codan for further information.

Type nr. 1915

Application: Oil/Fuel

Standard Length: 40 metres

Working Temperature: -30°C to 100°C

Inside: NBR

Colour: Black

Reinforcement: Polyester

Outside: CR

Colour: Black

Standards: EN12115:2021 EN1761:1999

Std. branding: CODAN 1915 OIL/FUEL - EN12115-NBR1-D-M-EN1761-15BAR

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
32,0 45,2 15 48 200 1.030 1915032000
38,0 50,0 15 48 220 1.190 1915038000
40,0 53,2 15 48 275 1.240 1915040000
45,0 59,4 15 48 290 1.520 1915045000
51,0 65,4 15 48 320 1.690 1915051000
63,0 77,8 15 48 425 2.100 1915063000
76,0 92,0 15 48 530 2.740 1915076000
80,0 96,0 15 48 565 2.880 1915080000
90,0 106,8 15 48 640 3.200 1915090000
102,0 120,0 15 48 720 3.900 1915102000

Email PDF

Please confirm that you are not a robot

Type: 1915      OE: Oil/Fuel

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
06/10/2024