Codan 2006 Oil Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 2006 - DNV/LLOYDS

Black, wrapped, high-quality hose approved for use as wet diesel exhaust pipe and fuel pipe on boats less than 15 m in length. Max. 55% aromatics. Approved by Lloyds and Det Norske Veritas. Incorporated double steel helix allows the hose to be bent without kinking in small engine compartments with limited access. Fire-retardant outer rubber coating. Normally installed using heavy-duty hose clamps tightened with Allen key.
Please contact Codan for further information.

Type nr. 2006

Application: Marine Exhaust

Standard Length: 40 metres

Working Temperature: -30°C to 100°C

Inside: NBR

Colour: Black

Reinforcement: Polyester w/ double steel helix

Outside: CR

Colour: Black

Standards: DNV/LLOYDS

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
25,0 35,0 10 30 110 750 2006025000
32,0 42,0 10 30 160 920 2006032000
38,0 48,0 10 30 200 1.060 2006038000
40,0 50,4 10 30 220 1.094 2006040000
42,0 52,4 10 30 215 1.147 2006042000
45,0 55,0 10 30 240 1.230 2006045000
48,0 58,4 10 30 235 1.440 2006048000
51,0 64,0 10 30 280 1.660 2006051000
55,0 67,8 8 24 285 1.790 2006055000
57,0 70,0 8 24 300 1.840 2006057000
60,0 72,8 8 24 310 1.950 2006060000
63,0 76,0 8 24 330 2.400 2006063000
70,0 82,8 8 24 340 2.620 2006070000
76,0 89,0 7 21 430 2.840 2006076000
80,0 90,0 7 21 440 2.990 2006080000
90,0 104,0 7 21 475 3.300 2006090000
102,0 116,0 7 21 600 4.680 2006102000
152,0 172,0 6 18 1.060 9.400 2006152000
203,0 223,0 5 15 1.200 12.450 2006203000
254,0 276,0 5 15 1.500 17.360 2006254000
305,0 329,0 5 15 2.000 20.480 2006305000

Email PDF

Please confirm that you are not a robot

Type: 2006      OE: Marine Exhaust

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
05/07/2022