Codan 8035 Food Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 8035 - FDA

Red, wrapped, high-quality pressure hose with special compound outer coating which ensures that the hose is exceptionally hard-wearing and weather resistant. Mainly for use in breweries as flexible connection between pipelines and tanks or tankers. Capable of withstanding brief periods of high temperature (120°C) during flushing/cleaning. Normally installed using stainless crimped-on fittings, hose clamps or clamp fittings. Please contact Codan for further information.

Type nr. 8035

Application: Beer, Wine etc.

Standard Length: 40 metres

Working Temperature: -40°C to 85°C

Inside: NR

Colour: White

Reinforcement: Polyester

Outside: CR/NR

Colour: Red

Standards: FDA

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
13,0 25,0 10 30 0 530 8035013000
16,0 28,0 10 30 0 620 8035016000
19,0 31,0 10 30 0 690 8035019000
25,0 38,0 10 30 0 880 8035025000
30,0 43,0 10 30 0 1.030 8035030000
32,0 45,0 10 30 0 1.090 8035032000
35,0 48,0 10 30 0 1.160 8035035000
38,0 51,0 10 30 0 1.250 8035038000
40,0 53,0 10 30 0 1.300 8035040000
45,0 59,0 10 30 0 1.630 8035045000
51,0 66,0 10 30 0 1.820 8035051000
55,0 70,0 10 30 0 1.960 8035055000
60,0 75,0 10 30 0 2.100 8035060000
63,0 78,0 10 30 0 2.190 8035063000
70,0 86,0 10 30 0 2.640 8035070000
76,0 92,0 10 30 0 2.830 8035076000
80,0 96,0 10 30 0 3.000 8035080000
89,0 105,0 10 30 0 3.270 8035089000
90,0 106,0 10 30 0 3.300 8035090000
102,0 118,0 10 30 0 3.790 8035102000

Email PDF

Please confirm that you are not a robot

Type: 8035      OE: Beer, Wine etc.

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
05/12/2023