Codan 1918 Oil Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 1918 - -

Black, wrapped delivery hose with integrated anti-static wire and excellent low-temperature tolerance. Hard-wearing, weather-resistant outer layer of rubber. Inner rubber layer is resistant to max. 40% aromatics. For use as pressure oil hose and tanker hose in industrial applications.
Please contact Codan for further information.

Type nr. 1918

Application: Oil/Fuel

Standard Length: - metres

Working Temperature: -35°C to 70°C

Inside: NBR

Colour: Black

Reinforcement: Polyester, Antistatic copper wire

Outside: CR

Colour: Black

Standards: -

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
19,0 31,0 18 54 0 630 1918019000
25,0 37,0 18 54 0 750 1918025000
32,0 44,0 18 54 0 950 1918032000
38,0 51,0 18 54 0 1.200 1918038000
45,0 59,0 18 54 0 1.550 1918045000
51,0 65,0 18 54 0 1.700 1918051000
63,5 79,0 18 54 0 2.400 1918063000
76,0 91,0 18 54 0 2.650 1918076000
102,0 118,0 18 54 0 3.700 1918102000

Email PDF

Please confirm that you are not a robot

Type: 1918      OE: Oil/Fuel

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
08/12/2025