Codan 2940 Bunker Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 2940 - BS-1435 EN 1765

Hose for loading and unloading dock and barge operations with hydrocarbons with aromatic content up to 50%. Fully in accordance with BS-1435. Free ends or with steel flanges vulcanized with the hose. Other dimensions, lengths or features available on request. We manufacture any type of special hoses. 40 m coils up to 3" and 20 m coils above. "S10" Type.

Type nr. 2940

Application: Loading and Unloading

Standard Length: 20 metres

Working Temperature: -25°C to 85°C

Inside: SBR

Colour: Black

Reinforcement: High Tensile Strength Synthetic Cord. Helix wire and antstatic wire

Outside: SBR

Colour: Black

Standards: BS-1435 EN 1765

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
102,0 132,0 10 40 650 7.600 2940102000
152,0 191,0 10 40 850 14.500 2940152000
203,0 249,0 10 40 1.200 22.800 2940203000
254,0 298,0 10 40 1.350 32.400 2940254000

Email PDF

Please confirm that you are not a robot

Type: 2940      OE: Loading and Unloading

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
07/12/2024