Codan 1200 Air / Water Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 1200 - ISO 8031 + ISO 1431-1

Antistatic mandrel built hose for transfer of water and other inert fluids. Specially developed by CODAN for fire hose reels. Protected with black NBR/PVC rubber with good weather resistant properties. Lined with foam resistant Black antistatic EPDM rubber.

Electrically conductive: R< 106 Ohm/m (ISO 8031:2009).
Ozone resistant acc. DIN ISO 1431-1:2012-08.
Please contact Codan for further information.

Type nr. 1200

Application: Air / Water Hose

Standard Length: 30 metres

Working Temperature: -40°C to 100°C

Inside: EPDM

Colour: Black

Reinforcement: High strength synthetic textile yarns

Outside: NBR/PVC

Colour: Black

Standards: ISO 8031 + ISO 1431-1

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
25,0 37,0 20 62 255 950 1200025000
32,0 45,5 20 62 300 1.250 1200032000
38,0 51,0 20 62 350 1.484 1200038000

Email PDF

Please confirm that you are not a robot

Type: 1200      OE: Air / Water Hose

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
20/04/2021