Codan 1158 Steam Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 1158 - BS 5342 Type 2 A

Red, heavy-duty, spiralized steam hose manufactured to BS 5342 Type 2 Class A.
For use in industry for saturated steam and hot water in laundries, dairies, slaughterhouses, power stations, etc. Also available in black.
For steam, must be installed using special connectors. Crimped-on fittings are recommended for pressurised steam.
Please contact Codan for further information.

Type nr. 1158

Application: Saturated Steam and Water

Standard Length: 20/40 metres

Working Temperature: -20°C to 235°C

Inside: EPDM

Colour: Black

Reinforcement: Braided Steel

Outside: EPDM

Colour: Red

Standards: BS 5342 Type 2 A

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
13,0 25,0 17 170 70 550 1158013000
16,0 30,0 17 170 85 655 1158016000
19,0 33,0 17 170 100 770 1158019000
25,0 40,0 17 170 140 1.030 1158025000
32,0 47,0 17 170 200 1.270 1158032000
38,0 53,0 17 170 250 1.470 1158038000
44,0 61,0 17 170 288 1.945 1158044000
51,0 68,0 17 170 350 2.500 1158051000

Email PDF

Please confirm that you are not a robot

Type: 1158      OE: Saturated Steam and Water

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Fax +45 56 64 65 48
  • Mail: info@codan.com
  • www.codan.com
17/06/2019