Codan 1232 Air / Water Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 1232 - ISO 1403: 1995

Red, industrial-quality water hose for use in all types of industrial flushing, cleaning, etc. Hard-wearing surface that also has excellent weather and ozone resistance.
From 32 mm: wrapped hose supplied in 40 m lengths. (old type 1210) Working temp. -30°C to +80°C. BP 3x safety factor. SBR/SBR.
Please contact Codan for further information.

Type nr. 1232

Application: Air / Water Hose

Standard Length: 50 metres

Working Temperature: -30°C to 100°C

Inside: EPDM

Colour: Black

Reinforcement: Polyester

Outside: EPDM

Colour: Red

Standards: ISO 1403: 1995

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
12,7 20,7 10 30 0 250 1232013000
15,9 23,9 10 30 0 300 1232016000
19,1 28,5 10 30 0 500 1232019000
25,4 34,8 10 30 0 580 1232025000
32,0 42,4 10 30 0 880 1232032000
38,0 48,4 10 30 0 1.020 1232038000
45,0 55,4 10 30 0 1.200 1232045000
50,0 61,0 10 30 0 1.360 1232051000
63,0 76,2 10 30 0 2.100 1232063000
70,0 83,2 10 30 0 2.360 1232070000
76,0 90,4 10 30 0 2.740 1232076000
102,0 116,8 10 30 0 3.690 1232102000
127,0 143,0 10 30 0 4.950 1232127000
152,0 168,0 10 30 0 5.870 1232152000
203,0 225,0 10 30 0 7.120 1232203000

Email PDF

Please confirm that you are not a robot

Type: 1232      OE: Air / Water Hose

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Fax +45 56 64 65 48
  • Mail: info@codan.com
  • www.codan.com
06/12/2019