Codan 1316 Chemical Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 1316 - EN 12115: 2021

Black, wrapped, flexible S&D hose. For use in the chemicals industry, e.g. as flexible connection between pipelines and tanks/tankers. Suitable for acids and other chemicals. For maximum safety, please consult the chemical resistance list to check the chemical used.
Normally installed using stainless DIN clamps.
Please contact Codan for further information.

Type nr. 1316

Application: Chemicals, EPDM

Standard Length: 40 metres

Working Temperature: -30°C to 90°C

Inside: EPDM

Colour: Black

Reinforcement: Polyester w/double steel helix wire and anti-static wire

Outside: EPDM

Colour: Black

Standards: EN 12115: 2021

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
19,0 31,0 10 48 125 720 1316019000
25,0 36,6 10 48 150 990 1316025000
32,0 44,0 10 48 175 1.120 1316032000
38,0 50,0 10 48 225 1.350 1316038000
51,0 66,0 10 48 275 1.870 1316051000
63,0 79,0 10 48 210 2.160 1316063000
76,0 92,0 10 48 350 3.250 1316076000
102,0 118,0 10 48 450 4.950 1316102000

Email PDF

Please confirm that you are not a robot

Type: 1316      OE: Chemicals, EPDM

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
06/06/2026