Codan 3009 Oil Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 3009 -

Black, flexible pressure hose for oil, water and air.
Universal hose for industrial applications.
Dirt-repellent outer coating and good ozone and weather resistance.
Normally installed using hose clamps or screw couplings.
Please contact Codan for further information.

Type nr. 3009

Application: Oil / Grease / Universal

Standard Length: 50 metres

Working Temperature: -30°C to 100°C

Inside: NBR

Colour: Black

Reinforcement: Polyester

Outside: NBR/PVC

Colour: Black

Standards:

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
6,3 12,7 15 45 40 143 3009006000
8,0 14,4 15 45 40 169 3009008000
10,0 16,4 15 45 50 199 3009010000
13,0 19,6 15 45 65 254 3009013000
15,9 22,9 15 45 80 323 3009016000
19,1 27,0 15 45 95 433 3009019000
25,4 34,4 15 45 125 561 3009025000
38,0 49,0 10 30 190 841 3009038000

Email PDF

Please confirm that you are not a robot

Type: 3009      OE: Oil / Grease / Universal

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
15/01/2025