Codan 3106 Fuel Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 3106 - -

Flexible, black, braided hose for leaded or unleaded petrol. For fuel pipes, e.g. connecting carburettor and fuel pump, in cars, motorcycles, mopeds, garden tractors, etc. Based on DIN 73379 B:1984. Normally installed using hose clamps. Must not be used in cars with injection systems. Please contact Codan for further information.

Type nr. 3106

Application: Fuel / Diesel

Standard Length: 30 metres

Working Temperature: -30°C to 100°C

Inside: NBR/PVC

Colour: Black

Reinforcement: -

Outside: Polyester

Colour: Black

Standards: -

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
3,2 7,2 13 50 20 44 3106032000
3,5 7,5 13 50 20 46 3106035000
4,0 9,0 11 45 20 68 3106040000
4,5 9,5 11 45 20 73 3106045000
5,0 10,0 10 42 20 80 3106050000
5,5 10,5 10 39 20 85 3106055000
6,0 11,0 10 39 20 90 3106060000
6,5 11,5 10 39 20 95 3106065000
7,0 12,0 9 35 20 100 3106070000
7,5 12,5 9 35 30 105 3106075000
8,0 13,0 8 32 30 110 3106080000
9,0 14,0 6 23 40 123 3106090000
9,5 15,0 6 23 40 130 3106095000
10,0 15,0 6 23 40 133 3106100000
11,0 16,0 5 20 40 144 3106110000
12,0 17,0 5 20 40 160 3106120000
12,7 17,7 5 15 40 180 3106127000

Email PDF

Please confirm that you are not a robot

Type: 3106      OE: Fuel / Diesel

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
17/11/2024