Codan 3550 Hydraulic Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 3550 - SAE 100 R4

Black, wrapped, flexible, dimensionally stable hose for use as return hose in hydraulic systems. Also suitable as standard suction/pressure hose for industrial applications. Double steel helix makes the hose ideal for use in confined areas.
Vacuum: Decreasing 90-40%.
Normally installed using heavy-duty hose clamps tightened with Allen key or DIN clamps.
Please contact Codan for further information.

Type nr. 3550

Application: Low-pressure Hydraulics

Standard Length: 40 metres

Working Temperature: -30°C to 100°C

Inside: NBR

Colour: Black

Reinforcement: Polyester

Outside: CR

Colour: Black

Standards: SAE 100 R4

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
19,1 31,0 20 82 127 740 3550019000
25,4 37,0 17 69 152 900 3550025000
32,0 44,0 14 55 203 1.120 3550032000
38,0 51,2 10 41 254 1.370 3550038000
51,0 63,8 7 27 305 1.815 3550051000
63,0 77,0 4 17 356 2.505 3550063000
76,0 90,0 3 15 457 2.960 3550076000

Email PDF

Please confirm that you are not a robot

Type: 3550      OE: Low-pressure Hydraulics

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
06/10/2024