Codan 4004 Brake Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 4004 - SAE J 1402 A: 1985 / FMVSS 106

Black, smooth, flexible hose with outer and inner surfaces of oil-resistant rubber. Also weather and ozone-resistant.
Mainly for use as flexible connection between lorries and trailers, but also suitable elsewhere on heavy goods vehicles.
Normally installed using specially designed couplings.
Please contact Codan for further information.

Type nr. 4004

Application: Compressed Air - Vehicles

Standard Length: 50 metres

Working Temperature: -40°C to 93°C

Inside: NBR

Colour: Black

Reinforcement: PET

Outside: CR

Colour: Black

Standards: SAE J 1402 A: 1985 / FMVSS 106

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
4,8 13,4 10 62 70 172 4004005000
6,3 15,9 10 62 80 233 4004006000
7,9 17,5 10 62 90 266 4004008000
9,5 19,1 10 62 90 300 4004010000
11,1 20,7 10 62 115 333 4004011000
12,7 22,2 10 62 124 362 4004013000
15,9 27,0 10 62 140 522 4004016000

Email PDF

Please confirm that you are not a robot

Type: 4004      OE: Compressed Air - Vehicles

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
08/12/2025