Codan 2601 Gas Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 2601 - EN ISO 3821:2019

Flexible, smooth, orange hose for liquefied petroleum gas (LPG), propane/butane, to EN ISO 3821:2019.
In accordance with the new EN ISO 3821:2019 and EN559, the hose is primarily for use in industrial welding and cutting applications. The 6.3 mm and 11.0 mm hoses are DG approved. Please contact Codan for further information.

Type nr. 2601

Application: LPG / Propane / Butane

Standard Length: 50 metres

Working Temperature: -30°C to 80°C

Inside: NBR

Colour: Black

Reinforcement: Polyester

Outside: EPDM

Colour: Orange

Standards: EN ISO 3821:2019

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
4,0 11,0 20 60 35 110 2601004000
5,0 11,4 20 60 40 116 2601005000
6,3 13,3 20 60 40 141 2601006000
8,0 15,0 20 60 40 173 2601008000
9,0 16,0 20 60 115 188 2601009000
10,0 17,0 20 60 50 203 2601010000
11,0 18,0 20 60 55 221 2601011000

Email PDF

Please confirm that you are not a robot

Type: 2601      OE: LPG / Propane / Butane

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
04/06/2023