Codan 2111 PVC Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 2111 - BGA/FDA

Transparent, cadmium-free, reinforced PVC hose for air, water, certain chemicals, acids, oils, etc. under pressure. Polyester fabric liner provides stable working and bursting pressures and great flexibility. Transparent design allows effective flow control.
Normally installed using hose clamps.
Please contact Codan for further information.

Type nr. 2111

Application: PVC Hose

Standard Length: 50 metres

Working Temperature: -20°C to 55°C

Inside: PVC

Colour: Transparent

Reinforcement: Polyester

Outside: PVC

Colour: Transparent

Standards: BGA/FDA

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
6,0 12,0 15 60 40 82 2111006000
8,0 14,0 15 60 65 113 2111008000
10,0 16,0 10 40 80 130 2111010000
12,5 18,5 10 40 100 166 2111013000
16,0 23,0 8 32 130 202 2111016000
19,0 27,0 7 28 150 285 2111019000
25,0 33,0 6 24 200 508 2111025000
32,0 42,0 6 22 255 413 2111032000
38,0 48,0 4 16 300 508 2111038000
50,0 60,0 3 12 400 698 2111050000

Email PDF

Please confirm that you are not a robot

Type: 2111      OE: PVC Hose

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
05/07/2022