Codan 2011 PVC Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 2011 - BGA/FDA

Transparent, cadmium-free, non-reinforced PVC hose for air, water, certain chemicals, acids, oils, etc. under low pressure.
Transparent design allows effective flow control.
Normally installed using hose clamps.
Please contact Codan for further information.

Type nr. 2011

Application: PVC Hose

Standard Length: 50 metres

Working Temperature: -20°C to 55°C

Inside: PVC

Colour: Transparent

Reinforcement: None

Outside: -

Colour: -

Standards: BGA/FDA

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
3,0 6,0 0 0 50 15 2011003000
4,0 6,0 0 0 50 18 2011004000
5,0 8,0 0 0 65 26 2011005000
6,0 9,0 0 0 70 45 2011006000
8,0 11,0 0 0 85 57 2011008000
10,0 16,0 0 0 130 108 2011010000
12,0 15,0 0 0 120 138 2011012000
16,0 22,0 0 0 175 181 2011016000
19,0 25,0 0 0 200 231 2011019000
25,0 31,0 0 0 250 321 2011025000
32,0 38,0 0 0 300 411 2011032000
38,0 47,0 0 0 375 501 2011038000
50,0 62,0 0 0 495 681 2011050000

Email PDF

Please confirm that you are not a robot

Type: 2011      OE: PVC Hose

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
16/01/2025