Codan 1212 Air / Water Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 1212 -

Red water hose for use where a flexible, hard-wearing, weather and ozone-resistant hose is required. Peak temp. 100 C. Normally installed using hose clamps and possibly a flushing head. Please contact Codan for further information.

Type nr. 1212

Application: Air / Water Hose

Standard Length: 50 metres

Working Temperature: -30°C to 90°C

Inside: EPDM

Colour: Black

Reinforcement: High Strength Synthetic Textile Yarns

Outside: EPDM

Colour: Red

Standards:

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
9,5 16,5 20 60 50 230 1212010000
12,7 21,5 20 60 65 360 1212013000
19,0 27,0 20 60 105 450 1212019000
25,0 35,0 20 60 200 760 1212025000
32,0 42,0 10 30 270 939 1212032000
38,0 48,0 10 30 320 1.115 1212038000
50,0 61,0 10 30 421 1.467 1212050000

Email PDF

Please confirm that you are not a robot

Type: 1212      OE: Air / Water Hose

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
21/03/2023