Codan 4715 Oil Cooling Hose

Back [1]

Print PDF [2]

Download PDF

E-mail PDF

Codan 4715 - SAE J1532A: 2014

Black transmission oil cooling hose (TOC) with smooth cover and 1 layer of braided aramid reinforcement.

AEM cover and liner together with the Aramid reinforcement withstands high temp applications, high flexibility and low volume expansion.

Used in the automotive sector by the OEM’s– Type A.

Type nr. 4715

Application: Oil Cooling Hose

Standard Length: 50 metres

Working Temperature: -40°C to 150°C

Inside: AEM

Colour: Black

Reinforcement: Aramid

Outside: AEM

Colour: Black

Standards: SAE J1532A: 2014

Std. branding: -

Inside dia. (mm) Outside dia. (mm) Working Pressure BAR Burst Pressure BAR Bend Radius (mm) Weight (g/m) Product code
7,5 14,5 20 50 72 153 4715007500
9,5 17,0 20 80 80 200 4715009500
11,0 18,5 20 80 88 219 4715011000
12,0 19,5 10 50 95 237 4715012000
18,5 27,0 10 50 133 384 4715018500
20,0 27,5 10 40 137 357 4715020000

Email PDF

Please confirm that you are not a robot

Type: 4715      OE: Oil Cooling Hose

This hose specification sheet has been prepared with great care in order to provide you with all the information you need. Written advice must be obtained from Codan Rubber before using any hose with untested media or before using in applications not covered in the product data sheet. Codan Rubber recommends regular maintenance, care and inspection of hoses before use. Hoses should be replaced if any physical damage is seen, especially to the cover of the hose or in the area around the couplings. All products must be stored in accordance with ISO 2230:2002 (Storage
of vulcanised Rubber Products). The individual conditions of an application will affect the life time of each product. Therefore please ensure that resistance to chemicals and cleaning procedures in our written product information is complied with. Codan Rubber’s warranty is void in the event of misuse such as excessive bending, crushing, stretching, use with incorrect media or use in environments outside the hose specification.
Please contact Codan Rubber for individual product manufacturing tolerances.

  • Codan Rubber A/S
  • Værkstedsvej 45-49, DK-4600 Køge, Denmark
  • Tel. +45 56 64 64 64
  • Mail: info@codan.com
  • www.codan.com
08/12/2025